Skip to main content
  • 产品
  • Evaluate our Software
  • 下载
  • Free Utilities
  • 购买
  • 支持
  • 关于我们
  • Search
    • Contact Us
    • Forum
    • Knowledge Base
    • Newsletter
    • RSS
  •   工作机会
  •   视频
  •   永续性
  • emUSB-Device
  • Performance
  • Technology
  • Add-Ons

Performance

The following values have been tested using the Bulk component.

Contact us
Downloads
Documentation
SEGGER emUSB-Device

System with a High-Speed USB Controller*

The following table shows the write and read speed of emUSB-Device:

DescriptionSpeed
Write speed (device to host)44.1 MB/s
Read speed (host to device)41.8 MB/s

Measured on a Cortex-M4 running at 180 MHz using an EHCI USB controller.

System with a Full-Speed USB Controller*

The following table shows the write and read speed of emUSB-Device:

DescriptionSpeed
Write speed (device to host) 1200 KByte/sec
Read speed (host to device)1200 KByte/sec

Measured on a Cortex-M4 running at 120 MHz using a Synopsys DWC2 USB controller.

The emUSB-Device host sample application "Performance.exe" was used to measure the performance, the sample is provided with all evaluation packages which contain emUSB-Device.

*The performance of a USB communication depends on a multitude of factors: Host operating system, device USB controller and hubs. Low transfer sizes can reduce the performance. When testing the performance of a USB device it is important to make sure that the bus bandwidth is not being used by other connected devices. Best performance is achieved with Linux host systems.

全球总部

德国: SEGGER Microcontroller GmbH

地址: Ecolab-Allee 5
40789 Monheim am Rhein, Germany
电邮: info@segger.com
电话: +49-2173-99312-0
传真: +49-2173-99312-28

网点分布

中国:哲戈微系统科技(上海)有限公司

地址: 中国上海市闵行区秀涟路133号
大虹桥国际A 栋218室
邮编201199
电邮: china@segger.com
电话: +86-133-619-907-60

通过ISO 9001认证

ISO 9001

30多年的嵌入式行业经验

First-class embedded software tools since 1992
  • 版本说明
  • 免责声明
  • 隐私策略
  • 沪ICP备2022005181号
  • 沪公网安备 31011202014525号
© 2025 SEGGER - 版权所有.

您即将离开 segger.cn 而访问境外网站,是否继续?