Skip to main content
  • 产品
  • Evaluate our Software
  • 下载
  • Free Utilities
  • 购买
  • 支持
  • 关于我们
  • Search
    • Contact Us
    • Forum
    • Knowledge Base
    • Newsletter
    • RSS
  •   工作机会
  •   视频
  •   永续性
  • SystemView
  • Supported RTOS
  • Technology
  • Licensing

Supported RTOS (Real-Time Operating System)

Compatible with embOS, uC/OS-III, Micrium OS Kernel, FreeRTOS, NuttX and Zephyr out-of-the-box

Buy now
Downloads
Documentation
SEGGER SystemView
  1. 1.Overview
    1. 1.1.Supported RTOS
  2. 2.Configuring embOS for SystemView
  3. 3.Using SystemView without an OS

Overview

To use SystemView the SystemView target module has to be included in the target application and the OS needs to be instrumented. SystemView can also be used with a non-instrumented OS or without any OS at all.
For a detailed description of the target implementation, please refer to the SystemView User Manual UM08027.

Supported RTOS

  • embOS
  • uC/OS-III
  • Micrium OS Kernel
  • FreeRTOS
  • NuttX
  • Zephyr

Configuring embOS for SystemView

SEGGER embOS (V4.12a and later) can generate trace events for SystemView and other recording implementations when profiling is enabled. Profiling is enabled in the OS_LIBMODE_SP, OS_LIBMODE_DP and OS_LIBMODE_DT embOS library configurations (For detailed information refer to the embOS User Manual UM01001).

In addition to the SystemView and RTT core module, SEGGER_SYSVIEW_Config_embOS.c needs to be included in the application. This file allows configuration to fit the target system, like defines for the application name, the target device and the target core frequency. It initializes the SystemView module and configures embOS to send trace events to SystemView.

At the start of the application, at main, after the target is initialized, SEGGER_SYSVIEW_Conf() has to be called to enable SystemView.

Now, when the application is running, connect the SystemView App to the target and start recording events. All task, interrupt, and OS Scheduler activity as well as embOS API calls are recorded when SystemView is connected or SEGGER_SYSVIEW_Start() has been called.

For a detailed description on how to configure embOS for SystemView, please refer to the SystemView User Manual.

Using SystemView without an OS

SystemView can be used without any instrumented OS at all, to record interrupt activity and user events. Integrating SystemView in such an application is as simple as adding three lines of code.
For a detailed description on how to configure the application and how to record interrupts, please refer to the SystemView User Manual.

全球总部

德国: SEGGER Microcontroller GmbH

地址: Ecolab-Allee 5
40789 Monheim am Rhein, Germany
电邮: info@segger.com
电话: +49-2173-99312-0
传真: +49-2173-99312-28

网点分布

中国:哲戈微系统科技(上海)有限公司

地址: 中国上海市闵行区秀涟路133号
大虹桥国际A 栋218室
邮编201199
电邮: china@segger.com
电话: +86-133-619-907-60

通过ISO 9001认证

ISO 9001

30多年的嵌入式行业经验

First-class embedded software tools since 1992
  • 版本说明
  • 免责声明
  • 隐私策略
  • 沪ICP备2022005181号
  • 沪公网安备 31011202014525号
© 2025 SEGGER - 版权所有.

您即将离开 segger.cn 而访问境外网站,是否继续?