Skip to main content
  • 产品
  • Evaluate our Software
  • 下载
  • Free Utilities
  • 购买
  • 支持
  • 关于我们
  • Search
    • Contact Us
    • Forum
    • Knowledge Base
    • Newsletter
    • RSS
  •   工作机会
  •   视频
  •   永续性
  • J-Link debug probes
  • J-Link Mictor 38 Adapter
  • Technology
  • Accessories
  • Tools
  • Models

J-Link Mictor 38 Adapter

The J-Link Mictor 38 Adapter connects to the 38-pin Mictor connector.

Buy now
Compare J-Link adapters
Documentation
SEGGER Debug & Trace Probes

Overview

The J-Link Mictor 38 Adapter connects to the 38 pin Mictor connector. The pin out follows the single target connector pinout specification as defined in the ARM "ETM Architecture Specification". The adapter connects the GND and JTAG pins to their counterparts on the 20-pin J-Link. Trace pins present on the Mictor connector are not connected as they are not present on the 20-pin J-Link connector. The 38-pin Mictor side of the adapter can be plugged either directly into the target side or via trace cable. The J-Link side connects to J-Link via 20-pin flat cable. If you need trace capability, take a look at the J-Trace Cortex-M PRO Trace Probe.

J-Link Mictor 38 Adapter
J-Link Mictor 38 Adapter
J-Link_Mictor38_Adapter_Pinout
PinSignal
5GND
9nRES
11TDO
12,14VTref
13RTCK
15TCK
17TMS
19TDI
21TRST

全球总部

德国: SEGGER Microcontroller GmbH

地址: Ecolab-Allee 5
40789 Monheim am Rhein, Germany
电邮: info@segger.com
电话: +49-2173-99312-0
传真: +49-2173-99312-28

网点分布

中国:哲戈微系统科技(上海)有限公司

地址: 中国上海市闵行区秀涟路133号
大虹桥国际A 栋218室
邮编201199
电邮: china@segger.com
电话: +86-133-619-907-60

通过ISO 9001认证

ISO 9001

30多年的嵌入式行业经验

First-class embedded software tools since 1992
  • 版本说明
  • 免责声明
  • 隐私策略
  • 沪ICP备2022005181号
  • 沪公网安备 31011202014525号
© 2025 SEGGER - 版权所有.

您即将离开 segger.cn 而访问境外网站,是否继续?