Price list — J-Link
Industry-leading performance and compatibility for embedded development.
- The most widely used family of debug probes worldwide
- Supports a wide range of CPUs and development environments
- Comprehensive feature set for professional embedded development
J-Link models
Every J-Link comes with one year of Initial Coverage & Warranty, providing hardware warranty and support. At the time of purchase, Coverage & Warranty can be extended to a total period of 3 or 5 years.
To extend coverage beyond the inital period, Extended Coverage & Warranty can be purchased.
Please note: Support is available for registered products only.
Organizations with a larger number of SEGGER hardware products may benefit from Company Support. This allows engineers to receive technical assistance regardless of the coverage status of their individual devices.
| Part # | Item | Description | Price [EUR] incl. coverage & warranty | ||
|---|---|---|---|---|---|
1 year | 3 years | 5 years | |||
| 8.12.28 | J-Link Pro PoE | J-Link Pro PoE is SEGGER's specialized programming and debug probe for creating test farms.
Software package included. | 1,298.-- | 1,496.-- | 1,676.-- |
| 8.12.00 | J-Link Pro | The universal debug probe.
Software package included. | 1,078.-- | 1,276.-- | 1,456.-- |
| 8.14.28 | J-Link WiFi | The debug probe with WLAN/WiFi interface.
Software package included. | 1,078.-- | 1,276.-- | 1,456.-- |
| 8.16.28 | J-Link Ultra | The ultra fast debug probe.
Software package included. | 848.-- | 1,046.-- | 1,226.-- |
| 8.08.28 | J-Link PLUS Classic | The JTAG/SWD debug probe with USB interface.
Software package included. | 638.-- | 836.-- | 1,016.-- |
| 8.19.28 | J-Link PLUS Compact | The JTAG/SWD debug probe with USB interface.
Software package included. | 638.-- | 836.-- | 1,016.-- |
| 8.08.00 | J-Link BASE Classic | The JTAG/SWD debug probe with USB interface.
Cable package included. | 448.-- | 646.-- | 826.-- |
| 8.19.00 | J-Link BASE Compact | The JTAG/SWD debug probe with USB interface.
Cable package included. | 448.-- | 646.-- | 826.-- |
| 8.08.91 | J-Link EDU Mini | Debug probe in reduced form factor for educational purposes Package includes:
|
|
| |
Included software package
Software licenses below are included for J-Link Plus and higher only:
Included cable package
- USB cable
- .1" 20-pin ribbon cable (18 cm)
Support
More information about what is included in the following support options is available here.
Extended Coverage & Warranty
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.05.00 | Extended Coverage & Warranty for J-Link | Renewal of Coverage & Warranty for 12 additional months | 148.-- |
Company Support
| Part # | Item | Description | Price |
|---|---|---|---|
| 5.05.10 | Company Support for hardware devices | Support for all devices within an organization, regardless of the support status of a single device. Help is guaranteed as long as the device version is under maintenance. | Upon request |
Accessories
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.06.80 | Mounting Block (4 pcs) | Mounting block to securely fasten a J-Link Pro PoE during use | 18.-- |
| 8.06.81 | Mounting Block (20 pcs) | Mounting block to securely fasten a J-Link Pro PoE during use | 48.-- |
| 8.06.96 | .05" 10-pin ribbon cable (15 cm) | .05" 10-pin ribbon cable (15 cm) | 12.-- |
| 8.06.97 | .05" 20-pin ribbon cable (15 cm) | .05" 20-pin ribbon cable (15 cm) | 12.-- |
| 8.06.99 | .1" 20-pin ribbon cable (18 cm) | .1" 20-pin ribbon cable (18 cm) | 12.-- |
| 8.06.05 | 10-pin Needle Adapter Connector Cable | 10-pin Needle Adapter Connector Cable | 74.-- |
Adapters
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.06.11 | 2mm Adapter | Adapts from .1" 20-pin standard connector to 2mm 20-pin connector. | 54.-- |
| 8.06.29 | 5V Target Supply Adapter | Adapts from standard 20-pin 0.1" socket to a standard 20-pin 0.1" header on the target side, provides a supply voltage of 5 V. | 108.-- |
| 8.06.16 | 6-Pin Needle Adapter | Adapts from .1" 20-pin connector to .05" 6-pin needle pattern. Package includes:
| 108.-- |
| 8.06.02 | 9-Pin Cortex-M Adapter | Adapts from 20-pin, 0.1'' Standard connector to .05" 9-pin Cortex-M connector. Package includes:
| 36.-- |
| 8.06.04 | 10-Pin Needle Adapter | Adapts from .1" 20-pin Standard connector to .05" 10-pin needle pattern. Package includes:
| 108.-- |
| 8.06.03 | 14-Pin TI Adapter | Adapts from 20-pin, 0.1'' Standard connector to TI 14-pin connector. Package includes:
| 54.-- |
| 8.06.00 | 19-Pin Cortex-M Adapter | Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector. Package includes:
| 36.-- |
| 8.06.28 | 50-Mil 10-Pin Patch Adapter | Adapts from the standard 20 pin 0.1" connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the 20-pin and 10-pin side. Package includes:
| 54.-- |
| 8.06.37 | Arduino MKR Adapter | Adapter to connect a J-Link EDU mini with 0.05"-pitch connector with cable or regular J-Link with standard 20-pin header with an Arduino board of the MKR series | 36.-- |
| 8.06.44 | ARM-14 Adapter | Adapter for Arm targets with .1" 14-pin mating JTAG connector. Package includes:
| 74.-- |
| 8.06.27 | Flying Wire Adapter | Adapts from the standard 20 pin 0.1" connector to a 10-pin row, allowing to connect J-Link or Flasher to target PCBs via flying wires. Especially useful when hooking up prototype HW where no final connector is decided yet. Or for manually connecting a J-Link or Flasher to ST Discovery boards. Package includes:
| 74.-- |
| 8.06.15 | Intel FPGA Adapter | The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin 100-mil Intel FPGA JTAG connector providing debug access to FPGA-based MCU cores like the dual-core Arm Cortex-A9 in the Cyclone V devices. Package includes:
| 54.-- |
| 8.06.08 | J-Link Mictor 38 Adapter | Adapts from 38-pin Mictor connector to standard 20-pin connector. | 164.-- |
| 8.06.13 | Measurement+Patch Adapter | Adapter for non-standard J-Link <-> Target connection. Package includes:
| 108.-- |
| 8.06.23 | Microchip 2-Wire JTAG TDI Adapter | Adapts from the standard .1" 20-pin target connector to Microchip .1" 6-pin connector. Package includes:
| 54.-- |
| 8.06.09 | Microchip Adapter | Adapts from the standard .1" 20-pin target connector to Microchip RJ11 modular debug connector. Package includes:
| 54.-- |
| 8.06.42 | MIPI-60 Adapter | Allows JTAG connections between J-Link, J-Trace or Flasher and Jacinto7 TI target hardware systems. | 108.-- |
| 8.06.30 | Programming Voltage Adapter | The Programming Voltage Adapter delivers two externally provided voltages to the target for programming targets with voltage requirements beyond 5 V. It can directly be inserted between the J-Link and the debug cable maintaining a 1:1 connection of all debug signals. | 108.-- |
| 8.06.32 | Right Angle Female to Female (RAFF) Adapter | Right angle female to female adapter with two female 0.1"-pitch 20-pin connectors. The adapter can be used to physically connect Flasher Compact to the target without cable. | 54.-- |
| 8.06.01 | RX Adapter | Adapts from .1" 20-pin Standard connector to 14-pin RX600 JTAG connector. Package includes:
| 108.-- |
| 8.06.10 | RX FINE Adapter | Adapts from .01" 20-pin standard connector to .1" 14-pin RX FINE connector. Package includes:
| 54.-- |
| 8.06.24 | SiFive-ARTY Adapter | The SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. | 54.-- |
| 8.06.12 | Signal Smoothing Adapter | The Signal Smoothing Adapter can be inserted between J-Link and the debug target to overcome signal integrity issues. | 54.-- |
| 8.06.17 | SiLabs C2 Adapter | Adapts from .1" 20-pin connector to .1" 10-pin SiLabs C2 connector. Package includes:
| 54.-- |
| 8.06.39 | STDC14 Adapter | Adapts from the 20-pin 0.1'' J-Link and Flasher debug connector to the 14-pin 0.05'' connector defined by ST. | 54.-- |
| 8.06.14 | Supply Adapter | Provides a fixed I/O voltage level for VTREF. It eliminates the need to connect VTREF. It eliminates the need to connect to the target. | 74.-- |
| 8.06.18 | Target Supply Adapter | Provides a default voltage of 3.3 V to power the target using pin 19. The voltage can be adjusted by replacing resistors. | 74.-- |
| 8.06.36 | Test Farm Power Adapter | Enables power that is supplied to a target through a USB connector to be switched on and off remotely using J-Link software. | 108.-- |
| 8.06.06 | TI-CTI-20 Adapter | Adapts from the standard .1" 20-pin target connector to TI CTI-20 connector. | 74.-- |
| 8.06.19 | Xilinx Adapter | Adapts from the standard .1" 20-pin target connector to Xilinx 2mm 14-pin connector (comp. Platform Cable USB II). Package includes:
| 54.-- |
Isolators
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.07.00 | JTAG Isolator | Isolator to loop into JTAG-interface connection to provide electrical isolation. | 218.-- |
| 8.07.01 | SWD Isolator Box | Isolator to loop into SWD/SWO-interface connection to provide electrical isolation. | 218.-- |
| 8.07.02 | USB Isolator | USB connector to provide host side electrical isolation. | 164.-- |
| 8.09.01 | SWD Isolator Plugin | Isolator to plug into the SWD/SWO-interface of the probe/programmer to provide electrical isolation. | 218.-- |
Additional Software
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.08.13 | J-Link Upgrade BASE to PLUS | J-Link PLUS Software bundle includes:
| 298.-- |
| 8.08.06 | J-Link SDK | Developer Pack DLL for J-Link. Includes 6 months of free support (2h) and updates. Company-wide License. | 1,980.-- |
| 8.08.18 | J-Link SDK extension | J-Link SDK one year Support and Update Agreement, including one year of updates and a support contingent of 2h. Can only be purchased by customers with a J-Link SDK License (Model 8.08.06). | 980.-- |
| 8.08.29 | J-Link DSK | Device Support Kit for J-Link / J-Trace. Includes 6 months of free support (2h) and updates. Company-wide License. | 1,980,-- |
| 8.08.31 | J-Link DSK extension | J-Link DSK one year Support and Update Agreement, including one year of updates and a support contingent of 2h. Can only be purchased by customers with a J-Link DSK License (Model 8.08.29) | 980,-- |
J-Link OB — General purpose use
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.25.00 | Starter Kit: J-Link OB Fixed Single Target – Internal use (FSTI) | J-Link OB debug and program for a specified target device soldered onto same target board for internal use only — commercial use is permitted. The starter kit contains the following components:
Includes free software updates and 1 (one) year of email support | Upon request |
| 8.25.01 | Starter Kit: J-Link OB Fixed Single Target – Shipping product (FSTP) | J-Link OB debug and program only specified target device soldered onto same target board for use within shipping products — commercial use is permitted. The starter Kit contains the following components:
Includes free software updates and 1 (one) year of email support | Upon request |
| 8.25.02 | Starter Kit: J-Link OB Detachable Multi-target – Internal use (MTDI) | J-Link OB resides on its own detachable target board and can be used to program multiple targets (same set as supported by J-Link) for internal use only — commercial use is permitted. The starter kit contains the following components:
Includes free software updates and 1 (one) year of email support | Upon request |
| 8.25.03 | Starter Kit: J-Link OB Detachable Multi-target – Production (MTDP) | J-Link OB resides on its own detachable target board and can be used to program multiple targets (same set as supported by J-Link) for production purposes — commercial use is permitted. The starter kit contains the following components:
Includes free software updates and 1 (one) year of email support | Upon request |
| 8.25.04 | Additional J-Link OB licenses | Additional J-Link OB licences for general purpose use. The item can only be purchased in combination with a new or existing J-Link OB Starter Kit (8.25.00 to 8.25.03). Additional licenses have the Virtual COM Port option included. Prices vary between different J-Link OB models (volume discounts available). | Upon request |
| 8.25.05 | Add-On: Drag & Drop Programming | The Drag & Drop feature allows a J-Link to be recognized as flash drive, which can be used as a programming interface by Drag & Dropping binary files onto the J-Link drive. The item can only be purchased in combination with a new or existing J-Link OB Starter Kit (8.25.00 to 8.25.03). | Upon request |
| 8.25.06 | Add-On: Hardware Flow Control | Hardware flow control allows the J-Link OB to maintain a reliable data transmission via the Virtual COM port (VCOM) using the RTS/CTS lines. The item can only be purchased in combination with a new or existing J-Link OB Starter Kit (8.25.00 to 8.25.03). | Upon request |
J-Link OB — Evaluation board use
| Part # | Item | Description | Price [EUR] |
|---|---|---|---|
| 8.25.07 | Starter Kit: J-Link OB – Evaluation Board (EVAL) | J-Link OB debug and program only specified target device soldered onto same target board for evaluation use only. The starter kit contains the following components:
Includes free software updates and 1 (one) year of email support | Upon request |
| 8.25.08 | Additional J-Link OB licenses | Additional J-Link OB licences for evaluation purposes. The item can only be purchased in combination with a new or existing J-Link OB Starter Kit (8.25.07). Minimum number of licenses is 100 — Volume discounts available | Upon request |
| 8.25.09 | Add-On: Drag & Drop Programming | The Drag & Drop feature allows a J-Link to be recognized as flash drive, which can be used as a programming interface by Drag & Dropping binary files onto the J-Link drive. The item can only be purchased in combination with a new or existing J-Link OB Starter Kit (8.25.07). | Upon request |
| 8.25.10 | Add-On: Hardware Flow Control | Hardware flow control allows the J-Link OB to maintain a reliable data transmission via the Virtual COM port (VCOM) using the RTS/CTS lines. The item can only be purchased in combination with a new or existing J-Link OB Starter Kit (8.25.07). | Upon request |
Please note:
All prices exclude German sales tax. For shipments within Germany, please add sales tax. All prices are subject to change at any time and do not include shipment costs.
For price enquiries please contact sales@segger.com